Ecoplast
home page mail to Ecoplast
site map  english version
Home About News Catalog Support Dilers Contacts FAQ
Pipes for cables and wiring installation
Minitrunking MEX / ECO
Cable trunking system INSTA
Slotted ducts
Aluminum mini-columns
PVC Corrugated flexible pipes
HDPE corrugated flexible pipes
PP corrugated flexible pipes
PVC pipes reinforced
Halogen Free corrugated
Smooth rigid PVC pipes
HDPE rigid smooth pipes, single-wall
HDPE double-wall pipes
Accessories for all plastic pipes
Boxes and fittings
Connectors quick-terminal
Service floor boxes LUK
LAN components
Wiring devices
Steel Cable Trays
Plastic systems for air-conditions and water supply
Industrial plugs and sockets
Objects with the products Ecoplast
Catalogs
Certificates
Accessories for ceiling suspension

Code Name Code Name Code Name
94170 screw 610 94177 nut 6 94182 Disc diameter 6
94171 screw 612 94176 Nut with locking collar 6 94181 Disc diameter 6 reinforced
94173 screw 840 94179 nut 8 94184 Disc diameter 8
94174 screw 845 94178 Nut with locking collar 8 94183 Disc diameter 8 reinforced
94175 screw 1045 94180 nut 10 94185 Disc diameter 10
Studs, punched tape
Code Index Use
94050 SP 6 Stud 62000
94051 SP 8-2 Stud 82000
94052 SP 10-2 Stud 102000
94053 SP 12-2 Stud 122000
94055 LP 200 Perforated tape 20 (30m roll)

Anchor slaughtered
Suitable for concrete, stone, solid brick and block wall. In cases where you must install flush with the ceiling, wall or floor

Code Size, mm The limit load leveling, kN The limit load shear, kN
94161 625 1,3 1,5
94162 830 1,8 2,4
94163 1040 2,9 2,5
94164 1250 4,3 3,5

Anchor-screw
Suitable for concrete, stone, rock. For all types of installation - from mild to severe and very responsible in any attachment to the environment. Can be used for loop-through installation.

Code Size, mm The limit load leveling, kN The limit load shear, kN
94165 665 3,2 2,2
94166 895 2,4 2,88
94167 8120 3,3 3,8
94168 10125 4 5,7
94169 12115 6,5 9,6

Dowels, nails
Suitable for concrete, stone, concrete, low-density, expanded clay, hollow building blocks, hollow bricks, solid bricks and sheets of drywall. Main advantages: quick installation, the large size loads, a wide range, Loop fastening.

Code Size, mm The limit load leveling, kN The limit load shear, kN
94186 640 1,6 1,8
94187 655 1,6 1,8
94188 860 2,4 2,9
94189 8100 2,4 2,9
Attachment to the building structure
Cast clamp M8-10 (optional)
Code Name Weight, kg Q load, Pieces in pack
94193 MEF Clamp Kit M8x10 0,144 250 50
Cast clamp STR8-10 (optional)
Code Name Metal thickness, mm Weight, kg Q load, Pieces in pack
94030 STR8-10 10 0,38 250 20
Bracket for corrugated board
Code Name Metal thickness, mm Weight, kg Q load, Pieces in pack
94192 MEF MU-S8 Bracket for corrugated board 8 2,5 0,10 200 100
94191 MEF MU-S10 Bracket for corrugated board 10 2,5 0,10 200 100
94190 MEF LLA soundproof bracket for corrugated board 2,5 0,12 200 100
Profile PP mounting
Code Name Metal thickness,
mm
Weight, kg Pieces in pack
94054 Profile mounting PP100 1 0,95 50
94056 Profile of C-shaped perforated 1,5 2,69 3
94057 Profile of L-shaped perforated 2 2,7 3
94058 Profile of U-shaped perforated 2 4,05 3
94059 Profile of P-shaped perforated 322030002 2 0,9 2
Code View Index Metal thickness, mm Weight, kg , , L1, L2, L3,
Angle of 90 flat UPT (included with cover)
94060 UPT-50 0,55 0,49 50
94061 UPT-100 0,55 0,69 50
94062 UPT-200 0,7 1,65 50
94063 UPT-300 0,7 2,7 50
94064 UPT-400 1,0 5,1 50
Angle of 90 flat UPT (included with cover)
94461 UPT-100 (80) 1,0 1,95 50 80 215 215 85
94462 UPT-200 (80) 1,0 3,89 100 80 250 250 85
94463 UPT-300 (80) 1,0 5,84 200 80 350 350 85
94561 UPT-100 (100) 1,0 2,22 300 100 455 455 85
94562 UPT-200 (100) 1,0 4,44 400 100 525 525 150
94563 UPT-300 (100) 1,0 6,66 100
Angle of 90 flat UPPT (included with cover)
94070 UPPT-50 0,55 0,62 50
94071 UPPT-100 0,55 0,86 50
94072 UPPT-200 0,7 1,96 50
94073 UPPT-300 0,7 2,74 50
94074 UPPT-400 1,0 5,5 50
Angle of 90 flat UPPT (included with cover)
94471 UPPT-100 (80) 1,0 1,96 50 80 290 200 130
94472 UPPT-200 (80) 1,0 3,91 100 80 320 205 155
94473 UPPT-300 (80) 1,0 5,87 200 80 430 255 245
94571 UPPT-100 (100) 1,0 2,23 300 100 500 270 320
94572 UPPT-200 (100) 1,0 4,46 400 100 600 325 385
94573 UPPT-300 (100) 1,0 6,69 100
The angle of the flat smooth UPTp
94305 UPTp-50 0,55 0,28
94310 UPTp-100 0,55 0,43
94320 UPTp-200 0,7 0,83
94330 UPTp-300 0,7 1,34
94340 UPTp-400 1,0 1,98
The lid to the corner KUPTp
94306 KUPTp-50 0,55 0,15
94311 KUPTp-100 0,55 0,28
94321 KUPTp-200 0,7 0,64
94331 KUPTp-300 0,7 1,12
94341 KUPTp-400 1,0 1,72
The angle of the outer UVNT (included with cover)
94080 UVNT-50 0,55 0,52 50
94081 UVNT-100 0,55 0,75 50
94082 UVNT-200 0,7 1,42 50
94083 UVNT-300 0,7 1,95 50
94084 UVNT-400 1,0 3,7 50
The angle of the outer UVNT (included with cover)
94481 UVNT-100 (80) 1,0 1,180 50 80 270 185 125
94482 UVNT-200 (80) 1,0 2,360 100 80 270 185 125
94483 UVNT-300 (80) 1,0 3,530 200 80 270 185 125
94581 UVNT-100 (100) 1,0 1,340 300 100 270 185 125
94582 UVNT-200 (100) 1,0 2,690 400 100 325 185 200
94583 UVNT-300 (100) 1,0 4,030 100
The angle of internal UVT (included with cover)
94090 UVT-50 0,55 0,58 50
94091 UVT-100 0,55 0,76 50
94092 UVT-200 0,7 1,57 50
94093 UVT-300 0,7 2,04 50
94094 UVT-400 1,0 3,9 50
The angle of internal UVT (included with cover)
94491 UVT-100 (80) 1,0 1,44 50 80 320 210 155
94492 UVT-200 (80) 1,0 2,88 100 80 320 210 155
94493 UVT-300 (80) 1,0 4,32 200 80 320 210 155
94591 UVT-100 (100) 1,0 1,64 300 100 320 210 155
94592 UVT-200 (100) 1,0 3,29 400 100 400 210 225
94593 UVT-300 (100) 1,0 4,93 100
T-outlet TTp (included with cover)
94100 TTp-50 0,55 0,480 50 50 380 165 165
94101 TTp-100 0,55 0,950 100 50 400 150 150
94102 TTp-200 0,7 1,910 200 50 500 150 150
94103 TTp-300 0,7 2,860 300 50 620 160 160
94104 -400 1,0 3,820 400 50 720 160 160
T-outlet TTp (included with cover)
94410 -100 (80) 1,0 1,26
94420 -200 (80) 1,0 2,52
94430 -300 (80) 1,0 3,79
94510 -100 (80) 1,0 1,44
94520 -200 (80) 1,0 2,88
94530 -300 (80) 1,0 4,32
T-smooth removal of TTp
94205 TTp-50 0,55 0,400
94210 TTp-100 0,55 0,590
94220 TTp-200 0,7 1,050
94230 TTp-300 0,7 1,640
94240 TTp-400 1,0 2,330
The cover for the withdrawal KTTp
94206 KTTp-50 0,55 0,210
94211 KTTp-100 0,55 0,390
94221 KTTp-200 0,7 0,840
94231 KTTp-300 0,7 1,400
94241 KTTp-400 1,0 2,080
Coupler cross-XT (included with cover)
94110 -50 0,55 0,29 50 50
94111 -100 0,55 0,51 100 50
94112 -200 0,7 1,04 200 50
94113 -300 0,7 1,69 300 50
94114 -400 1,0 2,46 400 50
Coupler cross-XT (included with cover)
94411 -100 (80) 1,0 1,47 50 80 380 165 165
94412 -200 (80) 1,0 2,95 100 80 400 150 150
94413 -300 (80) 1,0 4,42 200 80 500 150 150
94511 -100 (100) 1,0 1,68 300 100 620 160 160
94512 -200 (100) 1,0 3,36 400 100 660 130 130
94513 -300 (100) 1,0 5,04 100
Splitter smooth cross-XTp
94605 XTp-50 0,55 0,540
94610 XTp-100 0,55 0,760
94620 XTp-200 0,7 1,290
94630 XTp-300 0,7 1,940
94640 XTp-400 1,0 2,700
The cover to the hub KXTp
94606 KXTp-50 0,55 0,290
94611 KXTp-100 0,55 0,510
94621 KXTp-200 0,7 1,040
94631 KXTp-300 0,7 1,690
94641 KXTp-400 1,0 2,460
Horizontal taps flowing OGp
94255 OGp-50 (5050) 0,55 0,32 350 50 200
94215 OGp-100 (10050) 0,55 0,37 400 50 200
94225 OGp-200 (20050) 0,7 0,48 500 50 200
94235 OGp-300 (30050) 0,7 0,59 600 50 200
The cover of a smooth horizontal taps KOGp
94256 KOGp-50 (5050) 0,55 0,16 350 50 200
94216 KOGp-100 (10050) 0,55 0,23 400 50 200
94226 KOGp-200 (20050) 0,7 0,32 500 50 200
94236 KOGp-300 (30050) 0,7 0,43 600 50 200
Transitions to metal trays
Transitions to rolling metal trays with a board of 50 mm width of the tray with one another. The range of new accessories include straight (right, left and center), T-and X-shaped transitions.
Go straight right
Code Index 1 () 2 () L () L1 () H () Weight, kg
94515 PPP 10050 100 50 300 150 50 0,28
94525 PPP 20050 200 50 300 150 50 0,43
94521 PPP 200100 200 100 300 150 50 0,46
94535 PPP 30050 300 50 300 150 50 0,53
94531 PPP 300100 300 100 300 150 50 0,56
94532 PPP 300200 300 200 300 150 50 0,7
94545 PPP 40050 400 50 300 150 50 0,75
94541 PPP 400100 400 100 300 150 50 0,78
94542 PPP 400200 400 200 300 150 50 0,92
94543 PPP 400300 400 300 300 150 50 1,01
Go straight left
Code Index 1 () 2 () L () L1 () H () Weight, kg
94415 PPL 10050 100 50 300 150 50 0,28
94425 PPL 20050 200 50 300 150 50 0,43
94421 PPL 200100 200 100 300 150 50 0,46
94435 PPL 30050 300 50 300 150 50 0,53
94431 PPL 300100 300 100 300 150 50 0,56
94432 PPL 300200 300 200 300 150 50 0,7
94445 PPL 40050 400 50 300 150 50 0,75
94441 PPL 400100 400 100 300 150 50 0,78
94442 PPL 400200 400 200 300 150 50 0,92
94443 PPL 400300 400 300 300 150 50 1,01
Go straight central
Code Index 1 () 2 () L () L1 () H () Weight, kg
94615 PPC 10050 100 50 300 150 50 0,29
94625 PPC 20050 200 50 300 150 50 0,44
94621 PPC 200100 200 100 300 150 50 0,47
94635 PPC 30050 300 50 300 150 50 0,54
94631 PPC 300100 300 100 300 150 50 0,57
94632 PPC 300200 300 200 300 150 50 0,71
94645 PPC 40050 400 50 300 150 50 0,76
94641 PPC 400100 400 100 300 150 50 0,79
94642 PPC 400200 400 200 300 150 50 0,93
94643 PPC 400300 400 300 300 150 50 1,02
The transition of T-type
Code Index 1 () 2 () L () L1 () L2 () H () Weight, kg
94751 PT 50100 50 100 400 150 200 50 0,42
94752 PT 50200 50 200 500 150 200 50 0,62
94753 PT 50300 50 300 600 150 200 50 0,77
94754 PT 50400 50 400 700 150 200 50 1,04
94715 PT 10050 100 50 350 150 250 50 0,43
94712 PT 100200 100 200 500 150 250 50 0,72
94713 PT 100300 100 300 600 150 250 50 0,89
94714 PT 100400 100 400 700 150 250 50 1,18
94725 PT 20050 200 50 350 150 350 50 0,74
94721 PT 200100 200 100 400 150 350 50 0,85
94723 PT 200300 200 300 600 150 350 50 1,4
94724 PT 200400 200 400 700 150 350 50 1,77
94735 PT 30050 300 50 350 150 450 50 0,93
94731 PT 300100 300 100 400 150 450 50 1,07
94732 PT 300200 300 200 500 150 450 50 1,43
94734 PT 300400 300 400 700 150 450 50 2,16
94745 PT 40050 400 50 350 150 550 50 1,41
94741 PT 400100 400 100 400 150 550 50 1,61
94742 PT 400200 400 200 500 150 550 50 2,09
94743 PT 400300 400 300 600 150 550 50 2,52
The transition of X-type
Code Index 1 () 2 () L () L1 () L2 () H () Weight, kg
94815 PX 10050 100 50 350 150 400 50 0,55
94825 PX 20050 200 50 350 150 500 50 0,85
94821 PX 200100 200 100 400 150 500 50 0,98
94835 PX 30050 300 50 350 150 600 50 1,05
94831 PX 300100 300 100 400 150 600 50 1,2
94832 PX 300200 300 200 500 150 600 50 1,68
94845 PX 40050 400 50 350 150 700 50 1,51
94841 PX 400100 400 100 400 150 700 50 1,73
94842 PX 400200 400 200 500 150 700 50 2,33
94843 PX 400300 400 300 600 150 700 50 2,82
Accessories for ladders
The connector is an external staircase
It is used for direct rigid connection ladders and connecting 90-bends, T-taps, X-couplers. Connects the trays from the outside, the bottom is fixed by screws (included).
Code Name Weight, kg
98002 The connector is an external staircase SNL 0,43
The connector is an internal staircase
It is used for direct rigid connection ladders and connecting 90 -bends, T-taps, X-couplers. Connects the trays on the outside, is fixed by bolts (included).
Code Name Weight, kg
98001 The connector is an internal staircase SVL 0,215
The connector is hinged ladder
It is used to connect the ladders required for the vertical angle of inclination. The kit consists of two bars connected by a screw and nut. Inserted in the trays inside.
Code Name Weight, kg
98005 The connector is hinged ladder SSHL 0,39
Clamp ladder
Used to secure ladders to the tower (the console bracket, suspension, wall). We catch tray inside. At low loads, clamp mount one on each arm alternately right and left. At high loads, both clamp mounted side profile of the stairs. For mounting to a support is used M6h40 bolt + nut.
Code Name Weight, kg
94152 Clamp ladder PRL (p) 0,1
94153 PBL (p) Clamp the side ladder 0,07

Internal staircase wall bracket KSLV-135
It is used for vertical and horizontal mounting ladders to the wall. Bracket KSVL installed inside stairs. To lock the side profile in the wall bracket using bolt kit M8. As the fixture to the wall using anchor bolts M10.

Code Name Weight, kg
94154 Internal staircase wall bracket KSLV 0,23

The connector is angled ladder
Used to create a T-taps and X-couplers. In order to form a T-tap connector used two corners to form the X-couplers used

Code Name Weight, kg
98003 The connector is angled ladder SUL 0,52

The connector is angled ladder
Used to create a T-taps and X-couplers. In order to form a T-tap connector used two corners to form the X-couplers used four corner connectors. The place of the connection have to be a support (bracket, suspension, etc.).

Code Name Weight, kg
98004 The connector is angled ladder SULU 1,21

Rotate 90 for ladders
Used to create a line in the horizontal rotation of 90 Ladder trays are connected to the connector turns SNL, DES, SSHL. At the junction have to be a support (bracket, suspension, etc.).

Code Name Weight, kg
98032 Rotate 90 for ladders LLMr-200 4,08
98033 Rotate 90 for ladders LLMr-300 4,55
98034 Rotate 90 for ladders LLMr-400 4,80
98035 Rotate 90 for ladders LLMr-500 5,35
98036 Rotate 90 for ladders LLMr-600 5,85

Tee TL for ladders
Used to create a line in the horizontal T-tap. Ladders are connected to the tee connector SNL, DES, SSHL. At the junction have to be a support (bracket, suspension, etc.).

Code Name Weight, kg
98102 Tee TL for ladders LLMr-200 4,55
98103 Tee TL for ladders LLMr-300 4,80
98104 Tee TL for ladders LLMr-400 5,10
98105 Tee TL for ladders LLMr-500 5,40
98106 Tee TL for ladders LLMr-600 5,80

The cross-shaped splitter for XL ladder tray
Used to create a line in the horizontal X-shaped branching. Ladders are connected to the hub connector SNL, DES, SSHL. At the junction have to be a support (bracket, suspension, etc.).

Code Name Weight, kg
98112 The cross-shaped splitter for XL-200 ladder tray LLMr-200 7,15
98113 The cross-shaped splitter for XL-300 ladder tray LLMr-300 7,40
98114 The cross-shaped splitter for XL-400 ladder tray LLMr-400 7,70
98115 The cross-shaped splitter for XL-500 ladder tray LLMr-500 8,0
98116 The cross-shaped splitter for XL-600 ladder tray LLMr-600 8,40
Copyright 2011 Ecoplast
All rights reserved
Design by Sergey Dorodnikov
home about news catalog support dilers contact faq